Printer: Difference between revisions

From Chaosdorf Wiki
(CLC1160 auf eigene Seite)
(Adding SL1 printer)
 
(13 intermediate revisions by 8 users not shown)
Line 1: Line 1:
{{Resource
== Table of printers ==
|name=HP LaserJet 2100TN
|description=S/W Laserdrucker
|location=Hackcenter
|image=Laserjetprinter.jpg
|preview image=No
|ownership=club
|use=free
|has label=No
}}


Für fancy stuff: [[Printer/CLC 1160|CLC 1160]] (Farblaser, A3 + A4). Für alles andere, siehe hier.
=== 2D ===


== Grayscale Laser ==
{| class=wikitable
! Name
! Description
! Network?
! Recommended use
|-
|[[Printer/DCP-9055CDN|DCP-9055CDN]]
|Color laser MFP (A4)
|yes
|printing & scanning
|-
| [[Printer/HP_M276N|M276]]
| Color laser MFP (A4)
| yes
| printing & scanning
|-
| [[Printer/DeskJet|DeskJet]]
| Color inkjet printer (A4)
| no
| printing on media unsuitable for lasers
|}


We have a [http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=bpl06416&locale=de_DE&prodSeriesId=25469&prodTypeId=18972 HP LaserJet 2100TN], which is a grayscale laser printer. It has PostScript support, two papertrays and no duplex unit.
=== 3D ===


=== Setup ===
{| class=wikitable
! Name
! Description
! Network?
! Recommended use
|-
|[[Ultimaker 3 extended]]
|Dual Extruder 3D Printer
|yes
|printing
|-
|[[Makerbot Replicator 2]]
|Single Extruder 3D Printer
|no
|printing
|-
|[[Archiv:Orcabot]]
|Single Extruder 3D Printer
|no
|admire
|-
|Prusa SL1
|Small Resin 3D Printer
|no
|<s>making a mess</s>detailed parts
|}


==== IPP ====
== Guidelines ==


If you want to print something, the printer should appear on your printer list if you use Linux. Printing server (CUPS) is [[Host:figurehead|figurehead]] and the printer is shared via IPP (Internet Printing Protocol).
* print on the smallest printer suitable
* before printing, turn printer on
* print single page to check your settings
* after printing, turn printer off
* donate money for your prints


==== FTP ====
* Paper empty? Check "Schrank 1" second from the right, third from the left.
* Only people who were given instructions are allowed to use the SL1


Printing is also possible by uploading a PostScript file to the [ftp://printer/PORT1 FTP service] on the printer.
== Usage ==


==== CUPS ====
All network printers should announce themselves via zeroconf/avahi/bonjour. Simply start the printer and wait for it to appear on your system.
 
You need to plug in the non-network printers to your device and set them up as you would setup any other printer.
You can setup printing on [http://localhost:631/admin?op=add-printer your system] with the following URL:
 
socket://printer
 
A [http://openprinting.org/ppd-o-matic.cgi?driver=pxlmono&printer=HP-LaserJet_2100&show=0 PPD] file is needed for installation.
 
=== Administration ===
 
Ask the friendly [[Admins|networking team]] for assistance, if the printing server gets stuck or questions remain.
 
=== Services on the printer ===
 
There is a Java based [http://printer/ web frontend] on the printer. It sucks.
 
[telnet://printer Telnet] is also available.
 
 
== Color Inkjet ==
 
There is also a color inkjet printer available, [http://h10025.www1.hp.com/ewfrf/wc/product?cc=de&lc=de&product=60096 HP Deskjet 930C]. Connect it to your computer with an LPT or USB cable and see http://www.openprinting.org/printer/HP/HP-DeskJet_930C for help with software drivers.
 
NOTE: Please use this printer at least once a month or so, else the inkjet cartridges will dry out.


[[Category:Resources]]
[[Category:Resources]]

Latest revision as of 13:11, 15 February 2024

Table of printers[edit | edit source]

2D[edit | edit source]

Name Description Network? Recommended use
DCP-9055CDN Color laser MFP (A4) yes printing & scanning
M276 Color laser MFP (A4) yes printing & scanning
DeskJet Color inkjet printer (A4) no printing on media unsuitable for lasers

3D[edit | edit source]

Name Description Network? Recommended use
Ultimaker 3 extended Dual Extruder 3D Printer yes printing
Makerbot Replicator 2 Single Extruder 3D Printer no printing
Archiv:Orcabot Single Extruder 3D Printer no admire
Prusa SL1 Small Resin 3D Printer no making a messdetailed parts

Guidelines[edit | edit source]

  • print on the smallest printer suitable
  • before printing, turn printer on
  • print single page to check your settings
  • after printing, turn printer off
  • donate money for your prints
  • Paper empty? Check "Schrank 1" second from the right, third from the left.
  • Only people who were given instructions are allowed to use the SL1

Usage[edit | edit source]

All network printers should announce themselves via zeroconf/avahi/bonjour. Simply start the printer and wait for it to appear on your system. You need to plug in the non-network printers to your device and set them up as you would setup any other printer.

Retrieved from "https://wiki.chaosdorf.de/index.php?title=Printer&oldid=31264"