Editing Printer

== Table of printers ==

=== 2D ===

{| class=wikitable
! Name
! Description
! Network?
! Recommended use
|-
|[[Printer/DCP-9055CDN|DCP-9055CDN]]
|Color laser MFP (A4)
|yes
|printing & scanning
|-
| [[Printer/HP_M276N|M276]]
| Color laser MFP (A4)
| yes
| printing & scanning
|-
| [[Printer/DeskJet|DeskJet]]
| Color inkjet printer (A4)
| no
| printing on media unsuitable for lasers
|}

=== 3D ===

{| class=wikitable
! Name
! Description
! Network?
! Recommended use
|-
|[[Ultimaker 3 extended]]
|Dual Extruder 3D Printer
|yes
|printing
|-
|[[Makerbot Replicator 2]]
|Single Extruder 3D Printer
|no
|printing
|-
|[[Archiv:Orcabot]]
|Single Extruder 3D Printer
|no
|admire
|}

== Guidelines ==

* print on the smallest printer suitable
* before printing, turn printer on
* print single page to check your settings
* after printing, turn printer off
* donate money for your prints

* Paper empty? Check "Schrank 1" second from the right, third from the left.

== Usage ==

All network printers should announce themselves via zeroconf/avahi/bonjour. Simply start the printer and wait for it to appear on your system.
You need to plug in the non-network printers to your device and set them up as you would setup any other printer.

[[Category:Resources]]
@@ Line 47: / Line 47: @@
 |no
 |admire
-|-
-|Prusa SL1
-|Small Resin 3D Printer
-|no
-|<s>making a mess</s>detailed parts
 |}
@@ Line 63: / Line 58: @@
 * Paper empty? Check "Schrank 1" second from the right, third from the left.
-* Only people who were given instructions are allowed to use the SL1
 == Usage ==