Editing Printer

We have a [http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=bpl06416&locale=de_DE&prodSeriesId=25469&prodTypeId=18972 HP LaserJet 2011TN], which is a grayscale laser printer. It has PostScript support, two papertrays and no duplex unit.

== automagically ==

If you want to print something, the printer should appear on your printer list if you use Linux. Printing server (CUPS) is [[figurehead]].

Printing is also possible by uploading a PostScript file to the [ftp://printer/PORT1 FTP service] on the printer.

== own configuration ==

You can setup printing on [http://localhost:631/admin?op=add-printer your system] with the following URL:

 socket://printer

A [http://openprinting.org/ppd-o-matic.cgi?driver=pxlmono&printer=HP-LaserJet_2100&show=0 PPD] file is needed for installation.

== administration ==

Ask the friendly [[networking team]] for assistance, if the printing server gets stuck or questions remain.

== services on the printer ==

There is a Java based [http://printer/ web frontend] on the printer. It sucks.

[telnet://printer Telnet] is also available.

[[Category:Resources]]
@@ Line 1: / Line 1: @@
-== Table of printers ==
+We have a [http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=bpl06416&locale=de_DE&prodSeriesId=25469&prodTypeId=18972 HP LaserJet 2011TN], which is a grayscale laser printer. It has PostScript support, two papertrays and no duplex unit.
-=== 2D ===
+== automagically ==
-{| class=wikitable
+If you want to print something, the printer should appear on your printer list if you use Linux. Printing server (CUPS) is [[figurehead]].
-! Name
-! Description
-! Network?
-! Recommended use
-|-
-|[[Printer/DCP-9055CDN|DCP-9055CDN]]
-|Color laser MFP (A4)
-|yes
-|printing & scanning
-|-
-| [[Printer/HP_M276N|M276]]
-| Color laser MFP (A4)
-| yes
-| printing & scanning
-|-
-| [[Printer/DeskJet|DeskJet]]
-| Color inkjet printer (A4)
-| no
-| printing on media unsuitable for lasers
-|}
-=== 3D ===
+Printing is also possible by uploading a PostScript file to the [ftp://printer/PORT1 FTP service] on the printer.
-{| class=wikitable
+== own configuration ==
-! Name
-! Description
-! Network?
-! Recommended use
-|-
-|[[Ultimaker 3 extended]]
-|Dual Extruder 3D Printer
-|yes
-|printing
-|-
-|[[Makerbot Replicator 2]]
-|Single Extruder 3D Printer
-|no
-|printing
-|-
-|[[Archiv:Orcabot]]
-|Single Extruder 3D Printer
-|no
-|admire
-|-
-|Prusa SL1
-|Small Resin 3D Printer
-|no
-|<s>making a mess</s>detailed parts
-|}
-== Guidelines ==
+You can setup printing on [http://localhost:631/admin?op=add-printer your system] with the following URL:
-* print on the smallest printer suitable
+ socket://printer
-* before printing, turn printer on
-* print single page to check your settings
-* after printing, turn printer off
-* donate money for your prints
-* Paper empty? Check "Schrank 1" second from the right, third from the left.
+A [http://openprinting.org/ppd-o-matic.cgi?driver=pxlmono&printer=HP-LaserJet_2100&show=0 PPD] file is needed for installation.
-* Only people who were given instructions are allowed to use the SL1
-== Usage ==
+== administration ==
-All network printers should announce themselves via zeroconf/avahi/bonjour. Simply start the printer and wait for it to appear on your system.
+Ask the friendly [[networking team]] for assistance, if the printing server gets stuck or questions remain.
-You need to plug in the non-network printers to your device and set them up as you would setup any other printer.
+== services on the printer ==
+There is a Java based [http://printer/ web frontend] on the printer. It sucks.
+[telnet://printer Telnet] is also available.
 [[Category:Resources]]