Editing Printer

{{Resource
|name=HP LaserJet 2100TN
|description=S/W Laserdrucker
|location=Hackcenter
|image=Laserjetprinter.jpg
|preview image=No
|ownership=club
|use=free
|has label=No
}}

Für fancy stuff: [[Printer/CLC 1160|CLC 1160]] (Farblaser, A3 + A4). Für alles andere, siehe hier.

== Grayscale Laser ==

We have a [http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=bpl06416&locale=de_DE&prodSeriesId=25469&prodTypeId=18972 HP LaserJet 2100TN], which is a grayscale laser printer. It has PostScript support, two papertrays and no duplex unit.

=== Setup ===

==== IPP ====

If you want to print something, the printer should appear on your printer list if you use Linux. Printing server (CUPS) is [[Host:figurehead|figurehead]] and the printer is shared via IPP (Internet Printing Protocol).

==== FTP ====

Printing is also possible by uploading a PostScript file to the [ftp://printer/PORT1 FTP service] on the printer.

==== CUPS ====

You can setup printing on [http://localhost:631/admin?op=add-printer your system] with the following URL:

 socket://printer

A [http://openprinting.org/ppd-o-matic.cgi?driver=pxlmono&printer=HP-LaserJet_2100&show=0 PPD] file is needed for installation.

=== Administration ===

Ask the friendly [[Admins|networking team]] for assistance, if the printing server gets stuck or questions remain.

=== Services on the printer ===

There is a Java based [http://printer/ web frontend] on the printer. It sucks.

[telnet://printer Telnet] is also available.


== Color Inkjet ==

There is also a color inkjet printer available, [http://h10025.www1.hp.com/ewfrf/wc/product?cc=de&lc=de&product=60096 HP Deskjet 930C]. Connect it to your computer with an LPT or USB cable and see http://www.openprinting.org/printer/HP/HP-DeskJet_930C for help with software drivers.

NOTE: Please use this printer at least once a month or so, else the inkjet cartridges will dry out.

[[Category:Resources]]
@@ Line 1: / Line 1: @@
-== Table of printers ==
+{{Resource
+|name=HP LaserJet 2100TN
+|description=S/W Laserdrucker
+|location=Hackcenter
+|image=Laserjetprinter.jpg
+|preview image=No
+|ownership=club
+|use=free
+|has label=No
+}}
-=== 2D ===
+Für fancy stuff: [[Printer/CLC 1160|CLC 1160]] (Farblaser, A3 + A4). Für alles andere, siehe hier.
-{| class=wikitable
+== Grayscale Laser ==
-! Name
-! Description
-! Network?
-! Recommended use
-|-
-|[[Printer/DCP-9055CDN|DCP-9055CDN]]
-|Color laser MFP (A4)
-|yes
-|printing & scanning
-|-
-| [[Printer/HP_M276N|M276]]
-| Color laser MFP (A4)
-| yes
-| printing & scanning
-|-
-| [[Printer/DeskJet|DeskJet]]
-| Color inkjet printer (A4)
-| no
-| printing on media unsuitable for lasers
-|}
-=== 3D ===
+We have a [http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=bpl06416&locale=de_DE&prodSeriesId=25469&prodTypeId=18972 HP LaserJet 2100TN], which is a grayscale laser printer. It has PostScript support, two papertrays and no duplex unit.
-{| class=wikitable
+=== Setup ===
-! Name
-! Description
-! Network?
-! Recommended use
-|-
-|[[Ultimaker 3 extended]]
-|Dual Extruder 3D Printer
-|yes
-|printing
-|-
-|[[Makerbot Replicator 2]]
-|Single Extruder 3D Printer
-|no
-|printing
-|-
-|[[Archiv:Orcabot]]
-|Single Extruder 3D Printer
-|no
-|admire
-|-
-|Prusa SL1
-|Small Resin 3D Printer
-|no
-|<s>making a mess</s>detailed parts
-|}
-== Guidelines ==
+==== IPP ====
-* print on the smallest printer suitable
+If you want to print something, the printer should appear on your printer list if you use Linux. Printing server (CUPS) is [[Host:figurehead|figurehead]] and the printer is shared via IPP (Internet Printing Protocol).
-* before printing, turn printer on
-* print single page to check your settings
-* after printing, turn printer off
-* donate money for your prints
-* Paper empty? Check "Schrank 1" second from the right, third from the left.
+==== FTP ====
-* Only people who were given instructions are allowed to use the SL1
-== Usage ==
+Printing is also possible by uploading a PostScript file to the [ftp://printer/PORT1 FTP service] on the printer.
-All network printers should announce themselves via zeroconf/avahi/bonjour. Simply start the printer and wait for it to appear on your system.
+==== CUPS ====
-You need to plug in the non-network printers to your device and set them up as you would setup any other printer.
+You can setup printing on [http://localhost:631/admin?op=add-printer your system] with the following URL:
+ socket://printer
+A [http://openprinting.org/ppd-o-matic.cgi?driver=pxlmono&printer=HP-LaserJet_2100&show=0 PPD] file is needed for installation.
+=== Administration ===
+Ask the friendly [[Admins|networking team]] for assistance, if the printing server gets stuck or questions remain.
+=== Services on the printer ===
+There is a Java based [http://printer/ web frontend] on the printer. It sucks.
+[telnet://printer Telnet] is also available.
+== Color Inkjet ==
+There is also a color inkjet printer available, [http://h10025.www1.hp.com/ewfrf/wc/product?cc=de&lc=de&product=60096 HP Deskjet 930C]. Connect it to your computer with an LPT or USB cable and see http://www.openprinting.org/printer/HP/HP-DeskJet_930C for help with software drivers.
+NOTE: Please use this printer at least once a month or so, else the inkjet cartridges will dry out.
 [[Category:Resources]]