Printer: Difference between revisions

Revision as of 11:14, 21 December 2019

Table of printers

Name	Description	Network?	Recommended use
M276	Color laser MFP (A4)	yes	printing & scanning
DeskJet	Color inkjet printer (A4)	no	printing on media unsuitable for lasers

Guidelines

print on the smallest printer suitable
before printing, turn printer on
print single page to check your settings
after printing, turn printer off
donate money for your prints

Paper empty? Check "Schrank 1" second from the right, third from the left.

Usage

All network printers should announce themselves via zeroconf/avahi/bonjour. Simply start the printer and wait for it to appear on your system. You need to plug in the non-network printers to your device and set them up as you would setup any other printer.

@@ Line 1: / Line 1: @@
-We have a [http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=bpl06416&locale=de_DE&prodSeriesId=25469&prodTypeId=18972 HP LaserJet 2011TN], which is a grayscale laser printer. It has PostScript support, two papertrays and no duplex unit.
+== Table of printers ==
-== automagically ==
+{| class=wikitable
+! Name
+! Description
+! Network?
+! Recommended use
+|-
+| [[Printer/HP_M276N|M276]]
+| Color laser MFP (A4)
+| yes
+| printing & scanning
+|-
+| [[Printer/DeskJet|DeskJet]]
+| Color inkjet printer (A4)
+| no
+| printing on media unsuitable for lasers
+|}
-If you want to print something, the printer should appear on your printer list if you use Linux. Printing server (CUPS) is [[figurehead]].
+== Guidelines ==
-Printing is also possible by uploading a PostScript file to the [ftp://printer/PORT1 FTP service] on the printer.
+* print on the smallest printer suitable
+* before printing, turn printer on
+* print single page to check your settings
+* after printing, turn printer off
+* donate money for your prints
-== own configuration ==
+* Paper empty? Check "Schrank 1" second from the right, third from the left.
-You can setup printing on [http://localhost:631/admin?op=add-printer your system] with the following URL:
+== Usage ==
- socket://printer
+All network printers should announce themselves via zeroconf/avahi/bonjour. Simply start the printer and wait for it to appear on your system.
+You need to plug in the non-network printers to your device and set them up as you would setup any other printer.
-A [http://openprinting.org/ppd-o-matic.cgi?driver=pxlmono&printer=HP-LaserJet_2100&show=0 PPD] file is needed for installation.
-== administration ==
-Ask the friendly [[networking team]] for assistance, if the printing server gets stuck or questions remain.
-== services on the printer ==
-There is a Java based [http://printer/ web frontend] on the printer. It sucks.
-[telnet://printer Telnet] is also available.
 [[Category:Resources]]