Printer: Difference between revisions

From Chaosdorf Wiki
(Adding SL1 printer)
 
(26 intermediate revisions by 12 users not shown)
Line 1: Line 1:
{{Resource
== Table of printers ==
|name=HP LaserJet 2100TN
|description=S/W Laserdrucker
|location=Hackcenter
|image=Laserjetprinter.jpg
|preview image=No
|ownership=club
|use=free
}}
{{Resource
|name=Canon CLC1160
|description=color laser printing
|location=Hackcenter
|image=Clc_003.jpg
|preview image=Yes
|ownership=private
|contactnick=fibre
|use=payment
|broken=repair
|annoying=ignore
}}
== Grayscale Laser ==


=== 2D ===


We have a [http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=bpl06416&locale=de_DE&prodSeriesId=25469&prodTypeId=18972 HP LaserJet 2100TN], which is a grayscale laser printer. It has PostScript support, two papertrays and no duplex unit.
{| class=wikitable
 
! Name
=== automagically ===
! Description
If you want to print something, the printer should appear on your printer list if you use Linux. Printing server (CUPS) is [[Host:figurehead|figurehead]].
! Network?
 
! Recommended use
Printing is also possible by uploading a PostScript file to the [ftp://printer/PORT1 FTP service] on the printer.
|-
 
|[[Printer/DCP-9055CDN|DCP-9055CDN]]
=== own configuration ===
|Color laser MFP (A4)
You can setup printing on [http://localhost:631/admin?op=add-printer your system] with the following URL:
|yes
|printing & scanning
|-
| [[Printer/HP_M276N|M276]]
| Color laser MFP (A4)
| yes
| printing & scanning
|-
| [[Printer/DeskJet|DeskJet]]
| Color inkjet printer (A4)
| no
| printing on media unsuitable for lasers
|}


socket://printer
=== 3D ===


A [http://openprinting.org/ppd-o-matic.cgi?driver=pxlmono&printer=HP-LaserJet_2100&show=0 PPD] file is needed for installation.
{| class=wikitable
 
! Name
=== administration ===
! Description
Ask the friendly [[Admins|networking team]] for assistance, if the printing server gets stuck or questions remain.
! Network?
 
! Recommended use
=== services on the printer ===
There is a Java based [http://printer/ web frontend] on the printer. It sucks.
 
[telnet://printer Telnet] is also available.
 
== Color Inkjet ==
There is also a color inkjet printer available, [http://h10025.www1.hp.com/ewfrf/wc/product?cc=de&lc=de&product=60096 HP Deskjet 930C].
Connect it to your computer with an LPT or USB cable and see http://www.openprinting.org/printer/HP/HP-DeskJet_930C for help with software drivers.
 
NOTE: Please use this printer at least once a month or so, else the inkjet cartridges will dry out.
 
== Color Laser/Photocopier ==
 
 
=== Benutzung ===
 
Der Drucker ist ebenso über {{H|figurehead}} freigegeben. Dort ist die passende PPD-Datei eingebunden.
 
Im Chaosdorf-Netzwerk sollte der Drucker in der Liste freigebener Drucker erscheinen und kann ohne weitere Konfiguration genutzt werden.
 
'''Bitte sparsam mit den Betriebszeiten und Anzahl der Drucke umgehen!'''
 
Die RIP bitte '''sauber''' (über das Menü vorne) herunterfahren und erst wenn sie aus ist den Netzschalter ausschalten.
 
=== Kosten/Spenden ===
 
Die Anschaffung des Druckers war sehr teuer. Die laufenden Kosten für Tonner, Ersatzteile, Wartung usw. sind nicht unerheblich.
 
Folgende Spendenvorschläge gelten für den großen Drucker:
* S/W Druck A4 - 10 Cent
* S/W Druck A3 - 20 Cent
* Farbdruck A4 - 50 Cent
* Farbdruck A3 - 1 Euro
* Ausdrucke mit hoher Deckung (Fotos, Poster) usw. verbrauchen übermässig viel Toner, hier sind nach Möglichkeit und eigenem Ermessen höhere Spendenbeträge angebracht.
 
=== Technische Daten ===
* 11 Farbkopien/-drucke pro Minute
* 42 Seiten/Min. (Schwarzweiß)
* Papier im A3-Überformat
* Papier bis 209 g/m²
* Papierkapazität: bis 4.400 Blatt
* Erweiterte Bildverarbeitung (bis zu 800 x 400 dpi)
* Erweitertes Druck- und Farbmanagement
* Netzwerkkompatibel
 
=== Zählerstände ===
Der Drucker verfügt über einen internen Zähler der nicht verändert bzw. zurückgestellt werden kann.
 
{| class="wikitable"
! Art
! Beschreibung
! Zählerstand
|-
|-
| Summe 2
|[[Ultimaker 3 extended]]
|
|Dual Extruder 3D Printer
| 00486398
|yes
|printing
|-
|-
| Kopie + Druck
|[[Makerbot Replicator 2]]
| Vollfarbe + Monochrom im Großformat
|Single Extruder 3D Printer
| 00170291
|no
|printing
|-
|-
| Kopie + Druck
|[[Archiv:Orcabot]]
| Vollfarbe + Monochrom im im Kleinformat
|Single Extruder 3D Printer
| 00117305
|no
|admire
|-
|-
| Summe
|Prusa SL1
| Schwarzweiß
|Small Resin 3D Printer
| 00028511
|no
|<s>making a mess</s>detailed parts
|}
|}


=== Fotos ===
== Guidelines ==
<gallery>
 
File:Clc 001.jpg|Der Tonerzulauf
* print on the smallest printer suitable
File:Clc 002.jpg|Die Fixiereinheit
* before printing, turn printer on
File:Clc 003.jpg|Komplett aufgebaut
* print single page to check your settings
File:Clc 004.jpg|Die PIC
* after printing, turn printer off
File:Clc 005.jpg|zum größenvergleich, ein Consumerdrucker oben drauf
* donate money for your prints
File:Clc 006.jpg|Das Display
 
File:Clc 007.jpg|Das Bedienfeld
* Paper empty? Check "Schrank 1" second from the right, third from the left.
File:Clc 008.jpg|Ein Schelm wer böses denkt ;)
* Only people who were given instructions are allowed to use the SL1
</gallery>
 
== Usage ==
 
All network printers should announce themselves via zeroconf/avahi/bonjour. Simply start the printer and wait for it to appear on your system.
You need to plug in the non-network printers to your device and set them up as you would setup any other printer.


[[Category:Resources]]
[[Category:Resources]]

Latest revision as of 14:11, 15 February 2024

Table of printers[edit | edit source]

2D[edit | edit source]

Name Description Network? Recommended use
DCP-9055CDN Color laser MFP (A4) yes printing & scanning
M276 Color laser MFP (A4) yes printing & scanning
DeskJet Color inkjet printer (A4) no printing on media unsuitable for lasers

3D[edit | edit source]

Name Description Network? Recommended use
Ultimaker 3 extended Dual Extruder 3D Printer yes printing
Makerbot Replicator 2 Single Extruder 3D Printer no printing
Archiv:Orcabot Single Extruder 3D Printer no admire
Prusa SL1 Small Resin 3D Printer no making a messdetailed parts

Guidelines[edit | edit source]

  • print on the smallest printer suitable
  • before printing, turn printer on
  • print single page to check your settings
  • after printing, turn printer off
  • donate money for your prints
  • Paper empty? Check "Schrank 1" second from the right, third from the left.
  • Only people who were given instructions are allowed to use the SL1

Usage[edit | edit source]

All network printers should announce themselves via zeroconf/avahi/bonjour. Simply start the printer and wait for it to appear on your system. You need to plug in the non-network printers to your device and set them up as you would setup any other printer.

Retrieved from "https://wiki.chaosdorf.de/index.php?title=Printer&oldid=31264"