Editing Aruba AP-225

{{Resource
|name=Aruba AP-225 ("ChaosdorfUnterwegs")
|description=WLAN auf Events oder so
|resource category=Hardware
|ownership=club
|has label=No
}}

== General ==
Aruba sells two models of the AP-225, the AP-225 and the '''I'''AP-225. The IAP includes their "Instant On" firmware, which provides a standalone Wi-Fi controller. The AP-225 does not include the controller and boot loops if it can't reach a central controller appliance.

However, there is a way to reflash an AP-225 to an IAP-225. Obviously, this voids the warranty and Aruba actively discourages users from converting their devices this way.

It’s possible that other APs made by Aruba can also be flashed with this method, but we didn’t test that.

== Flashing process ==
What you'll need:

* Cisco flavored serial rollover cable, RJ45 to DE-9
* optionally a serial -> USB adapter
* a TFTP server
* 30 to 60 minutes
* the firmware images. The firmware is downloadable through [https://networkingsupport.hpe.com Aruba's service portal], but you need to go through various steps and hoops to create an account there. You can ask {{U|Nik}} for the current firmware.

 - Connect AP to a serial console with a rollover cable, settings are 9600 8N1
 - At the "apboot" prompt, stop the autoboot process by pressing enter: <code>Hit <Enter> to stop autoboot</code>
 - Set a country code:
   - generate a SHA1 hash of the country code + serial number of the AP:
     # on macOS
     $ echo "DE-CNBHHMV57F" | shasum -a 1
     31b4fe935816bd03af2388dd0485640c316d9393
 
     # on Linux
     $ echo "DE-CNBHHMV57F" | sha1sum
     31b4fe935816bd03af2388dd0485640c316d9393
   - set the code with the command
     <code>proginv system ccode CCODE-<country code>-<hash from before></code>
     for example:
     <code>proginv system ccode CCODE-DE-31b4fe935816bd03af2388dd0485640c316d9393</code>
 - then, run the following commands:
   # unlock the bootloader or sth, idk
   <code>invent -w</code>
   # get an address via DHCP
   <code>dhcp</code>
   # set the TFTP server IP
   <code>setenv serverip 10.23.92.185</code>
   # flash the two OS slots with the Instant OS
   <code>upgrade os 0 ArubaInstant_Centaurus_8.6.0.24_89728</code>
   <code>upgrade os 1 ArubaInstant_Centaurus_8.6.0.24_89728</code>
   # reset all settings
   <code>factory_reset</code>
   # save the country code and boot image names
   <code>saveenv</code>
   # reboot the AP
   <code>reset</code>
 - Done! :3

== Notes ==

* Flashed with standalone firmware from May 2024 (8.6.0.24)
* the codename of the AP-220 series is "Centaurus"
* Takes around 4 minutes to boot.
** boot is finished when WiFi LEDs light up
* Bandwidth max ca. 800 mbps
* Can do 802.11ac and WPA3 (WPA2 is enabled tho)
* acquires address via DHCP for management
* web interface
** on port 443 (HTTPS)
** user: <code>admin</code>
** password: <code>chaosdorf</code>
** login doesn’t work until about 3 minutes AFTER boot
* SSID: <code>ChaosdorfUnterwegs</code>
* PW: same as in Chaosdorf