Aruba AP-225: Difference between revisions

Revision as of 17:34, 1 August 2024

Aruba AP-225 ("ChaosdorfUnterwegs")
WLAN auf Events oder so
Besitzstatus	Club-Eigentum
Label	Bitte ausdrucken

General

Aruba sells two models of the AP-225, the AP-225 and the IAP-225. The IAP includes their "Instant On" firmware, which provides a standalone Wi-Fi controller. The AP-225 does not include the controller and boot loops if it can't reach a central controller appliance.

However, there is a way to reflash an AP-225 to an IAP-225. Obviously, this voids the warranty and Aruba actively discourages users from converting their devices this way.

Flashing process

What you'll need:

Cisco flavored serial rollover cable, RJ45 to DE-9
optionally a serial -> USB adapter
a TFTP server
30 to 60 minutes
the firmware images. The firmware is downloadable through Aruba's service portal, but you need to go through various steps and hoops to create an account there. You can ask Nik for the current firmware.

- Connect AP to a serial console with a rollover cable, settings are 9600 8N1
- At the "apboot" prompt, stop the autoboot process by pressing enter: Hit <Enter> to stop autoboot
- Set a country code:
  - generate a SHA1 hash of the country code + serial number of the AP:
    # on macOS
    $ echo "DE-CNBHHMV57F" | shasum -a 1
    31b4fe935816bd03af2388dd0485640c316d9393

    # on Linux
    $ echo "DE-CNBHHMV57F" | sha1sum
    31b4fe935816bd03af2388dd0485640c316d9393
  - set the code with the command
    proginv system ccode CCODE-<country code>-<hash from before>
    for example:
    proginv system ccode CCODE-DE-31b4fe935816bd03af2388dd0485640c316d9393
- then, run the following commands:
  # unlock the bootloader or sth, idk
  invent -w
  # get an address via DHCP
  dhcp
  # set the TFTP server IP
  setenv serverip 10.23.92.185
  # flash the two OS slots with the Instant OS
  upgrade os 0 ArubaInstant_Centaurus_8.6.0.24_89728
  upgrade os 1 ArubaInstant_Centaurus_8.6.0.24_89728
  # reset all settings
  factory_reset
  # save the country code and boot image names
  saveenv
  # reboot the AP
  reset
- Done! :3

Notes

Flashed with standalone firmware from May 2024 (8.6.0.24)
the codename of the AP-220 series is "Centaurus"
Takes around 4 minutes to boot.
- boot is finished when WiFi LEDs light up
Bandwidth max ca. 800 mbps
Can do 802.11ac and WPA3 (WPA2 is enabled tho)
acquires address via DHCP for management
web interface
- on port 443 (HTTPS)
- user: admin
- password: chaosdorf
- login doesn’t work until about 3 minutes AFTER boot
SSID: ChaosdorfUnterwegs
PW: same as in Chaosdorf

@@ Line 10: / Line 10: @@
 Aruba sells two models of the AP-225, the AP-225 and the '''I'''AP-225. The IAP includes their "Instant On" firmware, which provides a standalone Wi-Fi controller. The AP-225 does not include the controller and boot loops if it can't reach a central controller appliance.
-However, there is a way to reflash an AP-225 to an IAP-225.
+However, there is a way to reflash an AP-225 to an IAP-225. Obviously, this voids the warranty and Aruba actively discourages users from converting their devices this way.
 == Flashing process ==