Printer: Difference between revisions

Latest revision as of 14:11, 15 February 2024

Table of printers[edit | edit source]

2D[edit | edit source]

Name	Description	Network?	Recommended use
DCP-9055CDN	Color laser MFP (A4)	yes	printing & scanning
M276	Color laser MFP (A4)	yes	printing & scanning
DeskJet	Color inkjet printer (A4)	no	printing on media unsuitable for lasers

3D[edit | edit source]

Name	Description	Network?	Recommended use
Ultimaker 3 extended	Dual Extruder 3D Printer	yes	printing
Makerbot Replicator 2	Single Extruder 3D Printer	no	printing
Archiv:Orcabot	Single Extruder 3D Printer	no	admire
Prusa SL1	Small Resin 3D Printer	no	~~making a mess~~detailed parts

Guidelines[edit | edit source]

print on the smallest printer suitable
before printing, turn printer on
print single page to check your settings
after printing, turn printer off
donate money for your prints

Paper empty? Check "Schrank 1" second from the right, third from the left.
Only people who were given instructions are allowed to use the SL1

All network printers should announce themselves via zeroconf/avahi/bonjour. Simply start the printer and wait for it to appear on your system. You need to plug in the non-network printers to your device and set them up as you would setup any other printer.

@@ Line 1: / Line 1: @@
-We have a [http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=bpl06416&locale=de_DE&prodSeriesId=25469&prodTypeId=18972 HP LaserJet 2011TN], which is a grayscale laser printer. It has PostScript support, two papertrays and no duplex unit.
+== Table of printers ==
-== automagically ==
+=== 2D ===
-If you want to print something, the printer should appear on your printer list if you use Linux. Printing server (CUPS) is [[figurehead]].
+{| class=wikitable
+! Name
+! Description
+! Network?
+! Recommended use
+|-
+|[[Printer/DCP-9055CDN|DCP-9055CDN]]
+|Color laser MFP (A4)
+|yes
+|printing & scanning
+|-
+| [[Printer/HP_M276N|M276]]
+| Color laser MFP (A4)
+| yes
+| printing & scanning
+|-
+| [[Printer/DeskJet|DeskJet]]
+| Color inkjet printer (A4)
+| no
+| printing on media unsuitable for lasers
+|}
-Printing is also possible by uploading a PostScript file to the [ftp://printer/PORT1 FTP service] on the printer.
+=== 3D ===
-== own configuration ==
+{| class=wikitable
+! Name
+! Description
+! Network?
+! Recommended use
+|-
+|[[Ultimaker 3 extended]]
+|Dual Extruder 3D Printer
+|yes
+|printing
+|-
+|[[Makerbot Replicator 2]]
+|Single Extruder 3D Printer
+|no
+|printing
+|-
+|[[Archiv:Orcabot]]
+|Single Extruder 3D Printer
+|no
+|admire
+|-
+|Prusa SL1
+|Small Resin 3D Printer
+|no
+|<s>making a mess</s>detailed parts
+|}
-You can setup printing on [http://localhost:631/admin?op=add-printer your system] with the following URL:
+== Guidelines ==
- socket://printer
+* print on the smallest printer suitable
+* before printing, turn printer on
+* print single page to check your settings
+* after printing, turn printer off
+* donate money for your prints
-A [http://openprinting.org/ppd-o-matic.cgi?driver=pxlmono&printer=HP-LaserJet_2100&show=0 PPD] file is needed for installation.
+* Paper empty? Check "Schrank 1" second from the right, third from the left.
+* Only people who were given instructions are allowed to use the SL1
-== administration ==
+== Usage ==
-Ask the friendly [[networking team]] for assistance, if the printing server gets stuck or questions remain.
+All network printers should announce themselves via zeroconf/avahi/bonjour. Simply start the printer and wait for it to appear on your system.
+You need to plug in the non-network printers to your device and set them up as you would setup any other printer.
-== services on the printer ==
-There is a Java based [http://printer/ web frontend] on the printer. It sucks.
-[telnet://printer Telnet] is also available.
 [[Category:Resources]]

Latest revision as of 14:11, 15 February 2024

Table of printers[edit | edit source]

2D[edit | edit source]

3D[edit | edit source]

Guidelines[edit | edit source]

Usage[edit | edit source]